We get quite a few emails asking about the fit differences between our men’s pant patterns, and just recently received a helpful suggestion from sewist, Heidi – why not make a visual blog post comparing the differences in all of our pant patterns? Sure thing!
In this post you will be able to compare the Jedediah Pants (our take on chinos), the Jutland Pants (our take on cargo pants), the Quadra Jeans (slightly tapered jeans) and the Fulford Jeans (straight leg jeans).
First, let’s look at the styling differences by examining the technical illustrations (right click and open image in new tab to see larger versioins of each image):
Important differences to note include: front pocket shape, yoke shape (or no yoke with darts instead), back pocket shape and size, leg style and fly styling.
- Front Pockets: Jedediah = slash, Jutland = swooped jean pockets, Quadra = standard jean pockets, Fulford = standard jean pockets
- Back Pockets: Jedediah = shaped and smaller patch pockets, Jutland = boxy and large patch pockets or welt Quadra = large patch pockets, Fulford = large patch pockets
- Seat Shaping: Jedediah = deep yoke, Jutland = darts, Quadra= narrow yoke, Fulford = narrow yoke
- Fly: Jedediah = narrow and long, Jutland = wider and two rows of stitching, Quadra = average width and two rows of stitching, Fulford = average width and two rows of stitching
- Legs: Jedediah = very obviously tapered, Jutland = straight and wide, Quadra= subtly tapered, Fulford= straight and moderate width
- Size Range: Jedediah = 30-40″ waist, Jutland = 30-45″ waist, Quadra = 26-50″ waist, Fulford = 26-50″ waist
- The Jedediah Pants have slash front pockets, a deep yoke, narrow fly, and tapered legs.
- Other notable differences include the following: The Jedediah Pants include a shorts option with rolled cuffs, the Jutland Pants include an optional full lining and all manner of work pant details, and the Quadra and Fulford Jeans include very detailed instructions for finishing the pants in a classic jeans style (topstitching tips and rivet installation).
Next, we will use the actual pattern pieces to compare fit. I’m comparing size 34. Below you can see the Jedediah Pants (yellow), Jutland Pants (brown), Quadra Jeans (blue) and Fulford Jeans (green).
The Jutland Pants and Jedediah Pants both have a high rise (just a little below the waist) while the Fulford has a mid rise and the Quadra Jeans are just slightly lower (I would still classify them to be mid-rise or perhaps mid-low rise…they are certainly not low rise). I’ve stacked the two most comparable trouser patterns so the rise and other differences are more obvious.
Let’s compare the crotch curve now: The crotch curve on the Jedediah Pants results in a close fit at the inseam (you can see how much higher it is compared to the Quadra Jeans). This high crotch creates a nice fitted appearance despite the roomy hips. The Jutland Pants feature a high crotch close fit in this area too and an even closer fit at along the center back seam. This means the design is well suited to men who have smaller bottoms and straight figures. This is because it was part of our athletic size chart that we have since relaxed slightly on our newer patterns – including the Quadra and Fulford Jeans. The athletic size chart caters towards ‘athletic slim figures’ so it is great for lankier men! The Quadra and Fulford Jeans are newer so you can see they have a lower more relaxed crotch curve to accomodate a fuller figure. The Quadra Jeans fit roomier than the Fulford jeans – you can tell this because the Quadra Jeans crotch is more of a J shape – meaning there is more room for a larger bottom at the curviest point of the ‘J’. The Fulfords, since they are intended to be a straight fit, are slimmer across the bottom. Again, look at the stacked pattern pieces to see how vastly different the crotch curve is for each design (the same stacked image is included in each section so you don’t have to scroll up and down to have a look).
Moving on to fit in the hips: The Jedediah Pants feature the most exaggerated hip curve since this is a classic feature of a chino fit. The Quadra Jeans feature a moderate hip curve. The Jutland Pants curve very slightly at the upper hip (but would still be considered quite straight in this area). The Fulford Jeans feature almost no hip curve (which is why many people like to sew these using selvage denim!).
And lastly, let’s compare the legs: Of the four designs, the Jutland Pants feature the most tapered lower leg (and this is visually exaggerated by the wide hip), the Quadra Jeans are next (almost the same taper but less obvious when worn since the hip is narrower), followed by the Fulford Jeans and then the Jutland Pants which have the wide straight leg of a work pant.
If you would like to read very detailed written descriptions about the fit and style of each garment, head to these older blog posts:
To wind up this post, please admire this beautiful pair of Jutland Pants that Mathias shared with us via email. He wrote that these were the first pants he has ever sewn. Look at those slick bar tacks:
He created this pair in linen and modified them to include a gusset so that he could use them as flexible rock climbing pants. If you would like to add your own small gusset to any of our trouser patterns, check out the tutorial I made during our Jutland Pant Sew-Along.
I hope that this post has helped you decide on the trouser pattern that suits your purposes best. If you are still uncertain, please don’t hesitate to email me at firstname.lastname@example.org with your questions!
[All photos of rust-colored linen trousers, including the photo at the top of the post were taken by and are property of Matthias and have been used with permission.]