Thread Theory

Welcome to the new era of menswear sewing. Go ahead and create something exceptional!


The perks of being married to a sewing instructor.

DIY men's t-shirt-6

Back in April, my sewing friend, Nicole (proprietress of The Spool Sewing Studio) was on a sewing spree which included some fresh Strathcona Tees for her husband, Scott.  Scott graciously agreed to model my favorite of the selection so that I could have a small backlog of garments to show you for a busy week just like this one (we are renovating and moving the Thread Theory studio into our new home).

So, without further ado, here is Scott’s charcoal Strathcona T-shirt:

DIY men's t-shirt-4

The neckline is finished with a self fabric band and the hems are finished with a twin needle.  The sleeves have been shortened very slightly to suit Scott’s preferred length and the hem has been left at full length to suit his long torso.  He loves the length of the Strath since he often struggles with the fit of boxy, short store bought tees.

DIY men's t-shirt-3

Nicole, always an enthusiastic ‘pusher’ of the Thread Theory brand, stitched our garment tag to the hem so that she (and Scott) can continue to spread the word about sewing menswear.  Isn’t it great to have friends who operate voluntarily as a marketing team?!  Thanks Scott and Nicole!

DIY men's t-shirt-5

By the way, the Strathcona Henley pattern is currently sold out in its paper format!  It is still available as a PDF though.  Matt and I are working on getting some quotes to reprint it.  We hope it will be available in the shop once more by the end of the summer (if the quotes are affordable!).


On Seamwork Radio and Around the Web

I was going to announce a few new tools and kits in our shop today but woke up to find my voice on Seamwork Radio this morning so I will share that first before moving on to product release news!
Seamwork Radio Sarai on Seamwork Radio

Seamwork Radio is a podcast hosted by Sarai of Colette Patterns.  It is a relatively new endeavor and, from what I understand, it has been a smashing hit with sewists!  Here is the description of Seamwork Radio that you can find on the Seamwork website:

Sewing your own clothing can change your perspective in surprising ways. Seamwork Radio brings you personal stories about all the ways designing, making, and wearing your own clothing can alter your life. We talk to artists, designers, and everyday creators about how the act of sewing has helped them slow down, get to know their bodies, discover their own identity, and take part in the growing movement to revive the art of sewing.

It is a thrill to be on Seamwork Radio and it was wonderful to finally have a chance to chat with Sarai.  When Matt and I travelled to Portland in April 2014 I agonized over whether I should pop by the Colette studio or not – I was so star struck by Sarai and her amazing company that I ended up chickening out and regretting my lack of courage after we left the city!  I don’t know what I was so scared of though.  Sarai is incredibly gracious and welcoming.  She was also very understanding of my nerves while being recorded for the radio episode~  I tend to lose my vocabulary when I am nervous and have a very high, squeaky voice – not the best situation for radio!

Anyways, if you would like to check out the episode I am featured in, you can find it here.  Thanks, Sarai, and the Seamwork Radio team for including me on your wonderful podcast!

Father's Day Tie - Thread Theory - 38

While I’m on a roll here talking about Thread Theory in the ‘public eye’, SewMamaSew featured my silk tie-making tutorial in their Luxe Gift compilation earlier this week.  The list features all sorts of luxurious gift ideas – some that feature sewing skills and others that do not.  I really love the leather tote bag and beautiful wool cape included within this list!  Thanks for the feature Sara (from Now Try This) and SewMamaSew!


Okay, moving on to the new goodies in our shop!  Let me announce the newest kit that I have put together for the holiday season:T Shirt Making Kit by Thread TheoryIt’s The Strathcona Henley & Tee Sewing Supplies Kit!  This kit features my favorite t-shirt making supplies and is prettily packaged and ready for gift giving!  As I assembled these kits I enjoyed imagining sewists giving them as Christmas presents to their non-sewist friends with the promise of an intro-to sewing t-shirt making session!  Wouldn’t that be a nice way to spread the joy and creativity of making this holiday season?

While this kit is designed to suit our Strathcona Henley pattern, it would be perfect to create all sorts of t-shirts – there is enough material included to sew any manner of men’s or women’s top.  You can check out all of the kit details on our website.


We also added a fresh shipment of Merchant & Mills books and tools in the shop this week!

Merchant and Mills Tools Thread Theory-5

While the Workbook isn’t menswear related at all, I’ve received quite a few emails from Canadians hoping that we might stock this gorgeous pattern book so that they can avoid the cost of shipping from England!  For male sewists I’ve added another Merchant & Mills book to the shop:Merchant and Mills Tools Thread Theory-3

This is a great volume for men interested in learning how to sew because it is refreshingly unisex!  The Sewing Book introduces you to all of the basic sewing concepts and then walks you through a series of projects so that you can employ your new skills in a hands on manner.  By the time you have completed the series of projects you will be ready to tackle any project and pattern you might be interested in!

In addition to the new books, we’ve added these tiny glass vials of minuscule hand sewing needles.  Tailors swear by them for evenly stitched invisible hems and quilters swear by them for quick and even hand quilting stitches.

Merchant and Mills Tools Thread Theory-2

And here is what is back in stock!  Beautiful, sharp buttonhole scissors and big, strong glass headed toilet pins!

Both of these tools sold out almost instantly last time we added them to our shop so I ordered LOTS this time so that you can be sure to get your hands on them when you need them :).

Head on over to our shop to check out the new books and tools in detail.  Please send me an email ( or comment on the blog to let me know if there is a specific tool that you would like us to stock (Merchant & Mills or otherwise).  I’d love to know!

Have a great weekend!


Matt’s Five New T-shirts

Today I have the results of the Strathcona Sew-along to show you!  Matt and I had planned a photoshoot of him in his new Strathcona T-shirts in the lovely morning light with a forest backdrop this morning…but I slept in after being unable to sleep most of the night!  Woops!  Instead, let me present to you the paparrazi style photo shoot that resulted in the five minutes between breakfast and when Matt had to head out the front door for work.  Sure, there is no beautiful back-drop in these photos and the lighting is perhaps less than ideal, but, looking on the positive side, seeing the t-shirts in action is a great way to look at the differences created by the various fabric types.

First up, morning coffee and Matt’s teal interlock cotton Strath:

Thread Theory Strathcona T-shirt Sew-Along (1 of 15)

This was the only shirt that I sewed using a zig zag stitch (I sewed the rest with my serger and a twin needle for the hems).  It is also the only shirt that features ribbing for the neck band.  I don’t think the shirt looks very home-made despite the fact that I hemmed it with a zig zag!  I chose very closely matching thread and the zig zag stitches don’t tend to grab the eye.Thread Theory Strathcona T-shirt Sew-Along (2 of 15)

This white tee (below) is made from the same Siltex interlock cotton as the teal t-shirt (above).  Siltex is a Canadian knit manufacturer – the only knit manufacturer left in Canada – that creates very high quality interlocks, fleece and Ponte De Roma along with ribbings dyed to match.  I am considering stocking their knits in our shop because I am very impressed with the quality (these shirts feel positively luxurious!) and it would be nice to support a Canadian manufacturer since there are so few left.

Thread Theory Strathcona T-shirt Sew-Along (4 of 15)

While my opinion of this fabric is clearly high, I am surprised to find that of all the shirts I sewed for Matt, the two interlock knits are his least favorite.  He is not used to interlock t-shirts and tends to gravitate towards thin and stable cotton jerseys.  Despite Matt’s verdict, I think this fabric still deserves a place in our shop and would be an excellent t-shirt fabric for most men.  I think Matt’s tastes have perhaps been shaped by the quality of t-shirt he normally buys (not very high quality!).  Also, he likes tight fitting t-shirts that make him feel like his arm muscles are bulging out of the sleeves :P.  The fairly stretchy and thick interlock makes the shirt appear larger and more relaxed than the stable cotton jersey tee that you will see at the end of this photo shoot.Thread Theory Strathcona T-shirt Sew-Along (5 of 15)

(Excuse the wrinkles in the photo above!  I had this shirt crammed in a grocery bag to sew at my friend’s house for our weekly sewing night last night!)

I only managed one quick shot of Matt’s thistle t-shirt made from an Anna Maria Horner print.Thread Theory Strathcona T-shirt Sew-Along (3 of 15)

I am curious to see if Matt will end up wearing this printed shirt often since it is a bigger scale print than I have ever seen him wear.  He says that he likes it a lot but I always wait to see which clothes get worn in high rotation before I judge if they are winners or not :).

Next up, as Matt headed from the kitchen and up the stairs to brush his teeth, I photographed my favorite fabric choice based solely on tactile enjoyment: bamboo and cotton jersey.  The bamboo content makes this jersey sooo soft!  It wasn’t the friendliest to sew (slippery and stretchy) but it is certainly the most friendly to hug!  Matt commented favorably about the softness as he put the shirt on.Thread Theory Strathcona T-shirt Sew-Along (6 of 15)

As you can see, the drape of this fabric makes the t-shirt a little bit nipply:Thread Theory Strathcona T-shirt Sew-Along (7 of 15)

But it also stretches pleasingly to suit the wearer as he moves:Thread Theory Strathcona T-shirt Sew-Along (8 of 15)

I suspect that bamboo blends wouldn’t be something every man would consider – for instance, if a man is used to wearing crisp button up shirts or stiff t-shirts that are not form fitting, he would likely find the bamboo cotton jersey too clingy and revealing.  Matt, as I said before, wears pretty tight t-shirts so the bamboo knit tee was not a shock to him.Thread Theory Strathcona T-shirt Sew-Along (9 of 15)

This is the only t-shirt that I finished with a twin needle along the neckline.  I left three of the other shirts with no topstitching around the neckline and did a zig-zag stitch around the teal t-shirt’s neckline.Thread Theory Strathcona T-shirt Sew-Along (10 of 15)

This bamboo tee didn’t actually need the top-stitching since it pressed nicely but I wanted to show you how professional the twin needle looks!  Actually, the only t-shirt that didn’t press well at the neckline was the teal tee with the ribbing neckline.  The bulky ribbing definitely needed taming with that zig zag stitch!  Here is a sample of a twin needle sleeve hem:
Thread Theory Strathcona T-shirt Sew-Along (11 of 15)

On to the last shirt!  At this point Matt was itching to get out the door and was clearly very understanding of my stubborn persistence to proceed with the photo shoot regardless of his need to get to work:Thread Theory Strathcona T-shirt Sew-Along (12 of 15)

When Matt put on this cotton jersey t-shirt he didn’t even have it fully over his head before pronouncing that it was his favorite.  He said that he likes how it doesn’t stretch much and he likes how thin the fabric is.Thread Theory Strathcona T-shirt Sew-Along (13 of 15)

You can see that, despite the thin nature of the fabric, the stiffness of the jersey (with no spandex content) results in a t-shirt that doesn’t cling to the body.  There is no nipple issue with this one!Thread Theory Strathcona T-shirt Sew-Along (15 of 15) I’m a little bummed that this is Matt’s favorite because I can tell that this is the lowest quality fabric out of all five shirts!  I am curious to see which of the shirts will wear the best over time – my bets are all on the sumptuous interlocks!

This last photo is Matt discovering that he was going to be five minutes late for work.  So sorry Matt!  And THANK YOU!Thread Theory Strathcona T-shirt Sew-Along (14 of 15)



So I would love to hear: Which fabric would you choose for the Strath?  Do you think I should stock the Canadian-made interlocks in our shop?


How to Sew a Men’s T-shirt

Thread Theory  How to Sew a Men's T-shirt

Here we are, ready to sew a knit t-shirt!  This post will go step by step through each moment of sewing a men’s knit t-shirt using a basic sewing machine with a zig zag stitch.  This is the third post of the Strathcona
Tee Sew-along featuring our Strathcona Henley menswear sewing pattern.  You could use this tutorial with any basic t-shirt pattern though!

Are you ready to sew?  It won’t take long!


  • Keep in mind that the Strathcona Henley has 5/8″ seam allowances on all seams.  Some t-shirt patterns may have smaller seam allowances than this – make sure to check your pattern!
  • Insert a ballpoint needle into your machine and test your stitch style (check out this post if you are wondering how to choose a stitch style)
  • Reduce the pressure on your presser foot if your sewing machine provides this option – if you are unsure whether it does, make sure to take the time to check your manual.  Reducing the pressure will make handling your knit fabric much easier since it will not become stretched out as you sew.
  • Whenever you start sewing a seam, start with the needle in the “down position” so that it is lowered into the fabric.  This will reduce the risk of the first needle motion punching the fabric into the needle plate of the sewing machine.

Sew the Shoulders

If your knit is quite stretchy, you might like to stabilize the shoulders so that they don’t get saggy over time.  Stabilizing the shoulders will result in a smart looking fitted t-shirt – this may or may not be your style – you choose!

Thread Theory Sew a Men's T-shirt (2 of 55)

If you decide to stabilize, you can use rayon seam binding (as seen above), clear swimsuit elastic, a thin woven fabric strip, or even the selvedge of your knit fabric (you will notice that the selvedge isn’t as stretchy as the rest of your fabric).  The goal here is to choose something that doesn’t stretch much and isn’t very bulky.Thread Theory Sew a Men's T-shirt (3 of 55)Place the t-shirt front and back with right sides together.  Place the stabilizer along the wrong side of the back of the t-shirt.  You will notice that the back shoulder is wider than the front shoulder – it is drafted this way to accommodate for men’s muscular and rounded shoulders!  Stretch the shirt front to match the shirt back at the shoulder seam as you sew.
Thread Theory Sew a Men's T-shirt (7 of 55)

If you are using a very a stabilizer that does not allow any stretch at all, you might as well use a straight stitch for this seam.  The shoulder seams do not need to stretch and they are quite visible so a tidy straight stitch can produce an attractive seam.  If you choose to use an elastic or knit selvedge as a stabilizer you will still want to use a stretch stitch since all of your materials contain stretch!
Thread Theory Sew a Men's T-shirt (9 of 55)

Press the seam allowances towards the back to cover your stabilizer (it is also possible to press your seam allowances open if you would like to reduce bulk).Thread Theory Sew a Men's T-shirt (10 of 55) If you would like, you can finish your seam allowances using another row of zig zag stitching.  This will stop any potential fraying (which may or may not occur depending on the style of knit you choose).Thread Theory Sew a Men's T-shirt (12 of 55)
Trim the 5/8″ seam allowance to reduce bulk.
Thread Theory Sew a Men's T-shirt (15 of 55)

Sew the Neckline

Now that the shoulder seams are sewn, you will have a neck hole that is ready to finish with binding!
Thread Theory Sew a Men's T-shirt (16 of 55)

With right sides together, join the narrow edges of the neckline binding.  Sew this using a straight stitch (this short seam doesn’t need to stretch either).
Thread Theory Sew a Men's T-shirt (18 of 55)

Trim the seam allowance and press the seam allowances open.
Thread Theory Sew a Men's T-shirt (20 of 55)

Finish preparing the binding by folding it in half lengthwise so that the raw edges meet.  Press along the folded edge.Thread Theory Sew a Men's T-shirt (21 of 55)

This is what your finished neck binding will look like:Thread Theory Sew a Men's T-shirt (22 of 55)

Arrange the t-shirt body with right sides facing you.  Place the binding circle on top of t-shirt, alight all of the raw edges.  I like to match the binding seam to one of the shoulder seams but you could also align this seam with center back if you prefer.Thread Theory Sew a Men's T-shirt (27 of 55)If you are using the Strathcona Henley pattern, ignore all the notches on the neckline binding (they are intended for the Henley variation of the pattern).  Pin the binding to the neckline so that it is stretched evenly around the neckline – it might take some fiddling to get this evenly stretched.  I tend to use 8 pins spaced evenly.
Thread Theory Sew a Men's T-shirt (26 of 55)

Stitch the binding to the neckline using a zig zag (or other stretch stitch).  I used to place the t-shirt with the binding facing up on the sewing machine but recently switched my technique.  I now place the t-shirt facing up and stretch the t-shirt with my fingers as I sew.  Try out both ways and see what works best for you!  I find that my new method reduces the risk of creating little tucks in the t-shirt neckline (they are super annoying to stitch rip!!!).
Thread Theory Sew a Men's T-shirt (28 of 55)

Press the finished neckline.Thread Theory Sew a Men's T-shirt (29 of 55)

If you would like, you can finish the neckline by adding a line of stitching around the shirt 1/8″ from the neckline seam to lock the seam allowance in place.  I used a zig zag stitch here but you can up your game for really professional results by using a twin needle (or you can skip this step altogether if your fabric presses well and you don’t think your seam allowance will tend to flip upwards – I often avoid stitching when I am sewing with crisp and thin cotton jerseys but find it is necessary when sewing with thicker cotton interlocks).
Thread Theory Sew a Men's T-shirt (31 of 55)
Trim the neckline seam allowance:
Thread Theory Sew a Men's T-shirt (33 of 55)

I like to trim from the shirt side so I don’t risk snipping into the shirt!

Thread Theory Sew a Men's T-shirt (34 of 55)
Sew the Sleeves

Place the t-shirt and sleeve with right sides together.
Thread Theory Sew a Men's T-shirt (37 of 55)

Line up the shoulder seam with the middle sleeve notch:
Thread Theory Sew a Men's T-shirt (38 of 55)

Place a pin where each notch meets.Thread Theory Sew a Men's T-shirt (39 of 55)

The double notches indicate the back of the garment.Thread Theory Sew a Men's T-shirt (42 of 55)

Sew the sleeve seam using a zig zag stitch (or other stretch stitch).  You will need to adjust often (with the needle down so that the fabric doesn’t slip out of the way) to avoid creating any tucks and wrinkles.Thread Theory Sew a Men's T-shirt (43 of 55)

Finish the sleeve seam allowance with a second row of zig zag stitching and trim.
Thread Theory Sew a Men's T-shirt (46 of 55) Press the sleeve seam.  In the Strathcona instruction booklet I recommend to press the seam allowance towards the sleeves – this is the classic direction to place sleeve seams (as seen on tailored garments).  Lately I have been finding that pressing the sleeve seam allowances towards the garment and away from the sleeve produces a smoother seam more reminiscient of store bought t-shirts.  Try both ways to see which way fits best on the recipient’s shoulders!  Press the sleeve seam on a tailor’s ham or on the narrow curve of the end of an ironing board so as to keep the rounded shape of the seam.
Thread Theory Sew a Men's T-shirt (45 of 55)

Sew the Side SeamsThread Theory Sew a Men's T-shirt (48 of 55)

Pin the sleeve and side seams – make sure that the underarm seam meets.  Stitch using a zig zag stitch or other stretch stitch.
Thread Theory Sew a Men's T-shirt (49 of 55)

Finish the seam allowance with another row of zig zag stitching and trim the seam allowance.Thread Theory Sew a Men's T-shirt (50 of 55)

Press the seam allowances towards the back – your shirt is almost finished!

Thread Theory Sew a Men's T-shirt (51 of 55)Sew the Hems

You can finish the hem as you normally would – by pressing the raw edge up and then pressing upwards again – but you might find that this creates too much bulk for your knit t-shirt to sit nice and casually (it could look fairly stiff with a thick hem).  Alternatively, you could finish the edge by pressing up once at the hem notch:
Thread Theory Sew a Men's T-shirt (52 of 55)

Once pressed and pinned in place, stitch the single layer hem in place using a twin needle, or, as photographed, with a simple zig zag stitch.  Try your very best to keep the knit relaxed – refrain from stretching in any way!
Thread Theory Sew a Men's T-shirt (53 of 55)

Repeat this hemming step for the sleeve hems.
Thread Theory Sew a Men's T-shirt (54 of 55)

And that’s all there is to it!  A nice basic, classically shaped crew-neck menswear t-shirt is ready to wear!


I hope your t-shirt has turned out well!  I will be sharing a blog post on Friday featuring Matt in his finished t-shirts – he’s thrilled to have fresh basics added to his closet!

If you would like to share your Strathcona T-shirts (or any other t-shirts that you sewed while following this sew-along) please use #strathtee so we can see the results!


How to sew with knits

Thread Theory How to Sew With Knits

Welcome to Sewing with Knits 101!  I’ve written a Question and Answer post featuring the main questions that weighed heavy on my mind when I first began to sew with knits.  Judging by the emails we get about sewing with knits, these questions are also worrisome to many of you!  I hope this post will answer them so that you feel confident to get sewing:

Will my machine sew knits?

Thread Theory Sewing with Knits (15 of 24)

Three machines, three stitch types: A basic machine with a zig zag stitch, a fancier machine with a “stretch stitch” and a four thread serger.

If you have a basic sewing machine featuring several stitch styles:

Thread Theory Sewing with Knits (17 of 24)

A small zig zag stitch sewn with a regular ol’ domestic machine.

Yes!  Your machine probably includes a stretch stitch style and will most certainly include a zig-zag stitch.  Your goal when choosing a stitch is to find something that will allow the stitches to stretch so that they don’t snap when the fabric is stretched (i.e. when the t-shirt is being pulled on over the wearer’s head).  Test all of the stretch stitch styles to see which one you prefer.  I have had sewing machines in the past whose stretch stitch did not allow the fabric to stretch enough for my liking and I found the zig zag stitch was the best choice.  The sewing machine I have now has a killer stretch stitch that I almost prefer to my serger because it works like a charm no matter what fabric I am sewing!  Once you’ve found a stitch that stretches to your liking, sew a practice seam and spread it open – do you see thread ladders, bubbles or a tidy seam?  If you are using a zig zag stitch the best way to produce a tidy, straight seam is to use a narrow stitch width.

Thread Theory Sewing with Knits (18 of 24)

A fairly nice seam with a few small thread ladders visible (these would be less visible if I used a teal colored thread!).

If you have a fancy sewing machine with many stitch styles:

Thread Theory Sewing with Knits (19 of 24)

A neat “stretch stitch” option on my fancy old metal Kenmore. There are all sorts of stretch stitch styles so yours might not look exactly like this.

Yes!  You are spoiled for choices :).  Try out all of your stitch styles to see which one performs best with the fabric you are working with.  Thicker knits might sew up nicely with a fancy stitch style that includes many needle holes but you will probably want to avoid this stitch style if you are working with thin and stretchy jerseys.  The more the needle punches through the fabric, the more it weakens the fabric – not something you want when your fabric is quite delicate to start with!  Of course, you can combat this by using a ball point needle – these round tip needles push past the fabric fibers rather than piercing and breaking them.  There is a good chance that your fancy sewing machine came with a walking foot.  Now is the time to pull it out!  This foot will help to ease the top layer of knit fabric through at the same pace that the feed dogs are pushing the bottom layer through.  You will be able to stitch even the most slippery and ungainly knits without distorted seams and rippling hems!

Thread Theory Sewing with Knits (21 of 24)

Less visible thread ladders on this seam! I might want to decrease the stitch length though so the gaps appear smaller.

If you have an older sewing machine or industrial sewing machine with only a straight stitch:

While most people would probably say no, I say yes!  Just because you only have a straight stitch at your disposal doesn’t mean you should avoid knits altogether.  The garments you sew with a straight stitch will be more prone to developing holes in the seams if a stitch snaps but you have a sewing machine right there ready to run over any seams again if need be!  Besides, if you are gentle when putting on the t-shirt, you can likely avoid breaking any threads.  Increase your straight stitch length slightly to allow for a bit more stretch.  To finish your seams you could sew another row of straight stitching or choose a knit fabric that isn’t prone to unraveling (a jersey for instance) and skip seam finishing altogether!

If you have a serger:

Thread Theory Sewing with Knits (14 of 24)

Of course!  Sergers are designed to work with knits. Depending on your machine, you can set your threads up to stitch the seam and simultaneously finish the seam allowances or you might stitch the seam using a zig zag stitch and then finish the seam allowance with the serger.  One thing to watch out for when serging knits is for stretching or puckering of the entire seam.  Below you can see a stretched seam on the left, a puckered seam on the right and a nice straight seam in the middle.  To avoid puckering or stretching, play with your differential feed knob and a few fabric scraps each time you start working with a new knit fabric.Thread Theory Sewing with Knits (22 of 24)

Thread Theory Sewing with Knits (24 of 24)

The serged seam – my favorite of all the seams!



My knit fabric won’t cooperate while I cut out my pattern – do you have any tricks?

Trick #1: Cut on the floor

You won’t have to worry about your knit slipping off the table as you cut if you spread your fabric out on the (clean) floor.  If you have a large table that allows you to cut with your entire fabric spread out flat, this will work even better!

Thread Theory Sewing with Knits (5 of 24)

Trick #2: Cut out a single layer of fabric

Thread Theory Sewing with Knits (1 of 24)

If your knit fabric was knitted in the round (as is commonly the case), you will need to cut the tube along the grainline so that you can spread out your fabric as one layer.

While most sewing patterns ask you to cut out your pattern pieces with your fabric folded in half (with the selvedges together) it is more accurate to cut out knit garments using a single layer of fabric.  Working with a single layer will allow you to ensure the knit is completely flat (without folds and ripples) and isn’t stretched/distorted in any way.  If you have a pattern piece that is supposed to be cut “On the Fold”, trace the other half of the pattern piece so that you have paper pattern pieces representing the entire front and back of the garment and do not need cut along the folded fabric edge.

Remember, if you need two of one pattern piece it will need to be mirrored!  For example, if you are cutting out sleeves, cut out the first sleeve with the pattern piece right side up on the fabric.  Cut out the second sleeve with the pattern piece right side down on the fabric.  This will result in two mirrored sleeves (a right and a left sleeve).

Thread Theory Sewing with Knits (10 of 24)

Don’t forget to cut mirrored pattern pieces!!!

Trick #3: Use weights

Place heavy items (rocks, soup cans, pattern weights) on your pattern piece and on the fabric around the pattern piece.  Weighing everything down will help to combat the shifting of your scissors so that the fabric stays in one place and un-stretched as your scissors move along the edge of the pattern piece.

Thread Theory Sewing with Knits (6 of 24)

Trick #4: Use a rotary blade or slide your scissors

It is important to cut extra carefully when working with knits because the scissor’s movement can easily pull the knit fabric out of place resulting in jagged edges or misshapen pieces.  A rotary cutter eliminates any issues caused by scissor blade movement.  If you are using scissors to cut, slide the bottom blade of your scissors along the floor or cutting surface and move the top blade up and down.  This can be tricky to get the hang of but it will result in much more accurate cutting!

I want my t-shirt to be the best that it possibly can be!  Do you have any tips for cutting out the pattern pieces?

Tip #1: Keep the direction of greatest stretch in mind when placing pattern pieces

Double check (or triple check!) that you are laying out your pattern pieces so that the direction of greatest stretch runs around the body (rather than up and down the body).  If you cut your pattern pieces so that the stretchiest direction of the fabric is vertical along the body your knit garment will stretch and sag out of shape.  When cutting out the neck band for a t-shirt, you have a couple of options for placing your pattern piece on the fabric.  If your knit fabric is especially stable and you are worried that your neck band won’t be stretchy enough, place your neck band fabric on the bias (at a 45 degree angle to the grainline).  If your knit fabric is sufficiently stretchy, place your neck band so that the longest edge is aligned with the direction of greatest stretch (and the narrow edge is aligned with the grainline).  This will allow the neck band to stretch around the neck to help to retain the shirt’s shape.

Thread Theory Sewing with Knits (11 of 24)

Even though your pattern piece might indicate cutting the binding on the bias, use your judgement based on what type of fabric you have chosen. This neck binding is being cut out with a stretch ribbing so there is plenty of stretch available when I place the long edge of the binding in line with the direction of greatest stretch. If you were using a very stable knit, you might consider cutting the piece on the bias to create more stretch!

Tip #2: Ensure your pattern pieces are completely on grain

Cheap store bought t-shirts often have a very obvious problem – they twist around the body as you wear them so that the side seams are angling towards the front and back.  This twisting problem occurs because the grainline is not running vertically down the shirt front and back, instead, it is on an angle.  When the manufacturers cut out the fabric they stacked many, many layers of knit and then sawed through them to cut out the pattern pieces.  Either the blade of the saw was not sharp enough or the layers of fabric were too thick for the saw to handle, as a result some of the fabric layers (likely the loose ones on the top and bottom of the stack) shifted as the saw cut resulting in twisted, off grain pieces.  Don’t replicate this common problem while sewing your custom t-shirt!  Place your paper pattern piece on the fabric and measure from either tip of the grainline to the fabric selvedge to make sure that the grainline is aligned to the selvedge evenly (pictured below).

Thread Theory Sewing with Knits (7 of 24)

Thread Theory Sewing with Knits (8 of 24)

Tip #3: Cut notches outwards

Knits can be prone to ‘runs’ just as you might see on a knit stocking.  Cutting notches inwards as you might normally do when cutting out a pattern weakens the seam allowances of the garment.  As you wear and wash the t-shirt you might be horrified to notice that your t-shirt is unraveling at the seams where you cut your notch!  Instead of cutting notches inwards, cut little triangles of fabric outwards.  If you prefer not to perform this fiddly cutting technique, you could just mark your notches with chalk or a pencil – easy peasy!

Thread Theory Sewing with Knits (9 of 24)


Best wishes while you cut out your Strath Tee!  If you take the time now to ensure your machine is operating at full capacity and that your fabric is accurately cut out, the actual sewing of the t-shirt will be a total breeze.  Use the #StrathTee to show us the fabric you’ve chosen and to give us a look at your seam sample progress!


How to Choose Men’s T-shirt Fabric

How to Choose Men's T-Shirt Fabric

Choosing the perfect fabric is the most difficult aspect of sewing a men’s t-shirt!  This guide will help to demystify menswear appropriate knits so that you can start the sewing confident that you will end up with a classic and flattering T-shirt.

What makes a t-shirt knit masculine?

To many people, the answer to the above question would be easy – they would say that the knit must be 100% cotton and of medium weight.  As you may have already discovered, it can be very difficult to find such a fabric at your local fabric store!  I am here to argue that you can make a very manly t-shirt with all manner of knits.  Let me prove this to you by showing you some big brand store-bought examples ranging from basic cotton interlock to blended fabrics completely void of cotton!

Combed Cotton Interlock TShirt Fabric

100% Combed Cotton Interlock T-Shirt from Nordstrom – this is a classic choice of fabric that will create a great ‘basic tee’.

Cotton Jersey TShirt Fabric

100% Washed/Broken-In Cotton Jersey T-Shirt from J. Crew – this is a very modern and comfortable choice of fabric that will result in a very casual, drapey t-shirt.

Cotton Poly TShirt Fabric

99% Cotton, 1% Polyester Jersey T-Shirt from H&M – polyester blends are very commonly found in graphic tees or event tees.  A blended fabric can include a far higher percentage of poly than this example but it is important to keep in mind that this will result in a ‘sportier’ shirt, sweat wicking shirt best suited for the gym.  A small polyester content will often result in a t-shirt that doesn’t wrinkle when it comes out of the dryer or out of the dresser drawer!

Cotton Elastine TShirt Fabric

95% Cotton, 5% Spandex (i.e. Elastane) Jersey T-Shirt from H&M – a fabric with spandex content is best suited for tight fitting shirts that feature areas of negative ease (notice how the shoulders, chest and sleeves in the above example are skin tight).  Spandex content will often result in a heavier and more drapey fabric so it will cling to the body in an unflattering way if it is used with a loose fitting t-shirt design.

Viscose Wool Tshirt Fabric

85% Viscose (i.e. Rayon), 15% Wool Jersey T-Shirt from H&M – this example illustrates how fun it can be to experiment with fiber content when sewing t-shirts!  If you are into hiking and camping you might be interested to make a t-shirt ‘base layer’ out of Merino wool.  It isn’t difficult to find Merino wool yardage and the resulting t-shirt will cost FAR less than fancy base layer garments from outdoor stores!

Slub Cotton Jersey TShirt Fabric

100% Slub Cotton Jersey T-shirt from J.Crew – It can be fund to experiment with textures when choosing t-shirt knits.  A slubbed knit can look very rugged and masculine.  I find that if a fabric is slubbed and heathered and fairly light weight, it will result in a t-shirt that looks attractively reminiscent of a cowboy’s undershirt ;).

Linen Cotton TShirt Fabric

85% Cotton, 15% Linen Jersey T-Shirt from H&M – this is another great example of a creative blend of fibres.  You can also look for Cotton/Rayon knits (quite drapey) and Cotton/Bamboo knits (very soft and smooth) when choosing menswear t-shirt fabrics!

As you can see, most of these shirts feature medium weight fabrics with little drape and minimal stretch.  It is interesting to note that the only shirt containing spandex content features a much tighter fit than the other shirts.  Since spandex content is becoming an increasingly common element in knit fabrics, it is good to know that a masculine t-shirt can still be produced with the spandex-laden fabrics found all throughout fabric stores.

Aside from fabric content, it is important to note the style of knit.  An interlock knit is stiffer and has less drape than a jersey knit.  I find that if I am in doubt about the suitability of a fabric for menswear (especially if I am choosing a printed fabric), I will err on the side of caution by using an interlock rather than a jersey.

Check your closet!

So now that we’ve determined that there is a surprisingly large range of acceptable fabric types, we must narrow things down by keeping the prospective wearer’s preferences in mind!  The easiest way to do this is to open up the recipient’s closet and look at the t-shirts that are already there.  Are they mostly of medium weight?  What do the fabric content labels say?  Do many feature unusual textures and graphics?  Are there a broad selection of styles or does the person favor one type of fit?

Here are Matt’s favorite t-shirts as an example along with why they are his favorite:

Thread Theory Choosing Knits (1 of 4)

He has had this free event t-shirt for MANY years and it is only just now beginning to show wear.  He loves that the hems do not fold up and wrinkle as many of his t-shirts with less polyester content tend to do.  The weight is quite heavy compared to some of his more ‘fashionable’ t-shirts but the polyester adds a bit of fluidity to the fabric so it doesn’t look too crisp and so that it forms to his body just enough to be flattering.

Thread Theory Choosing Knits (3 of 4)

He wears these v-neck H&M t-shirts often because he likes the fit of the sleeves and the v-neck (and the selection of bright colors).  He wishes that the fabric were slightly heavier because they tend to show a bit of nipple!

Thread Theory Choosing Knits (2 of 4)

While he wears these Armani t-shirts often, their tendency to wrinkle bothers Matt.  The sleeves are always folding up and the narrow neck binding makes them look a bit misshapen.  These shirts were designed as undershirts rather than t-shirts and the fabric is even more light weight than the H&M t-shirts due to this.  Matt requires all of his clothes to be suitable for mulitple purposes so a thin t-shirt meant ONLY for use under button-ups does not suit his wardrobe.

Thread Theory Choosing Knits (4 of 4)

This is Matt’s favorite Strath Tee!  It is made using a Girl Charlee knit that is no longer available.  I think it may be a blended cotton/poly knit.  It doesn’t contain very much stretch and it is of light to medium weight (a touch heavier than the H&M tees).  Matt gets compliments on the print CONSTANTLY and he feels really confident in this shirt.  I shortened the sleeve length considerably to be the most flattering length for Matt (I will talk about this more in the next sew-along post!).  I think that the print suits the crew neck style and might be a touch more wild than Matt prefers if it were on a v-neck shirt.

How thick? How stretchy?

I like to err on the side of thick and not very stretchy but picking fabrics with different properties (thick and quite stretchy, thin and not very stretchy) is still a possibility as we saw in the ready to wear shirts above!  Here are the fabrics that I picked for the Strath Tee sew-along.  They include:

A 100% Cotton Interlock of medium weight with matching 1X1 ribbing…

Thread Theory Choosing Knits (1 of 7)

A 100% Cotton Interlock of medium weight without ribbing…

Thread Theory Choosing Knits (4 of 7)

A 100% Cotton Jersey of light weight (note that there is no spandex content so this fabric does not contain too much drape)…

Thread Theory Choosing Knits (2 of 7)

A cotton/bamboo blend jersey of light to medium weight (sorry, I don’t know the percentages!)…

Thread Theory Choosing Knits (3 of 7)


You can sort of see their relative thicknesses here (the teal and white knits are the same fabric in different colours so I only photographed the white interlock):

Thread Theory Choosing Knits (6 of 7)

And here are their stretch capabilities:

Thread Theory Choosing Knits (7 of 7)

I have stretched each fabric as far as it will stretch without becoming misshapen.  None of them are able to stretch very far but I was surprised that the cotton/bamboo jersey stretched farther than the interlock!  The cotton jersey stretched least of all and bounced back to its original shape the slowest of the three fabrics.

Do I need ribbing?

As you may be able to tell in the photos of store bought t-shirts at the top of this post, most modern t-shirts do not feature heavy ribbing at the neck band.  1X1 ribbing is the most common choice for modern t-shirt neck bands.  2X1 ribbing used to be a fairly common choice for men’s t-shirts in the past (these “Ringer Tees” would often feature ribbing at the sleeve hem as well) but this is no longer the case.  In fact, I have recently been noticing store bought men’s t-shirts with self neck binding rather than ribbing!

Ribbing Choices - TShirt Sewing

The Ringer Tee: A light weight jersey t-shirt featuring heavy ribbed bands (from American Apparel).

The advantage of using ribbing to bind a t-shirt neckline is that your neckline will not be prone to stretching out.  Ribbed knits spring back into their original shape very quickly.  If you can’t find matching or contrast ribbing, test your fabric’s shape retention abilities by stretching it considerably and then releasing it.  Does it revert to it’s original shape or does it look a bit saggy and stretched out?  If your fabric contains a small percentage of spandex, you will easily be able to skip purchasing ribbing because the spandex performs the same job as the rib knit.  If you are using a 100% Cotton knit that is quite crisp, you may find it keeps it’s shape tolerably well.  If you are using a blended jersey with considerable drape, you will likely find that the fabric is prone to dragging and drooping once it is stretched – you can combat this by cutting your neck band shorter or by finding a ribbing fabric for your neck band.

Can I use prints?

When deciding on a fabric choice, you might be tempted to use crazy prints.  While many menswear enthusiasts will urge you away from all-over prints…I say go for it!  Here are my reasons why:

  • It is next to impossible to find a border style print that you can position just over the chest of the shirt to simulate the appearance of your average graphic tee – believe me, I’ve tried!  If you don’t feel like getting crafty with fabric paint, spray paint or screen printing, an all over print might be your only choice.
  • It is fun to push boundaries while sewing!  A t-shirt doesn’t take much fabric or time to create so this is the perfect canvas for edgy print choices.  If the recipient is overwhelmed by the print, the t-shirt can easily be made into a tunic dress or a women’s t-shirt instead (speaking from experience here :P).
  • All over prints are becoming increasingly common in menswear.  Here is my favorite example from Canadian company Frank & Oak.  I like the idea of adding a solid pocket to the t-shirt to break up the print:

Printed Fabrics for Menswear Tees

Where to shop:

Since fabric stores are most often geared towards women’s fashion, children’s garments or quilting, it can be a little bit disheartening to sift through the knit section.  I often find myself grumpily pushing aside licensed cartoon French Terry, silky rayon knits, and endless bolts of pastel knits until I am left with only three or four suitable bolts of interlock or jersey to choose from!  Luckily, men’s t-shirts can be easily personalized using contrast stitching, contrast neck binding or even a contrast pocket if you are faced with a limited selection of colors or prints at your local fabric store.

If you are very limited at your local fabric shop and would like to find better quality or selection online, here is my tried and true list of online knit fabric shops!  Each of these shops is a favorite of mine for a unique reason:

Organic Cotton Plus

The quality and selection of the organic knits in this shop are excellent.  You can sort the fabrics so that you are only looking at Interlocks or Jerseys and you can even sort so that you are choosing fabrics made within the US!  The solid colors available are generally quite earthy and manly but there is also a growing selection of intriguing geometric prints.

Simplifi Fabric

If you are in Canada, you might feel extra limited in regards to knit choices due to the current exchange rates – ordering internationally just doesn’t make sense right now!  Fortunately, there is no need to look outside of Canada because Simplifi (based in Ontario) carries eco-friendly textiles of high quality.  Their knits section is quite large but you will have to sift through a large amount of prints designed for children’s garments (which are SUPER cute!).  If you sort by fibre, you will find that they have a great base of solid knits including a comprehensive selection of bamboo knits – my favorite!

Girl Charlee

If you are looking for a huge selection of fun all-over prints, this is the place to look!  You might want to order swatches since Girl Charlee carries such a huge range of knit styles – it can be difficult to tell how drapey, stretchy, heavy, or good quality they are based on the descriptions alone.  Matt finds some of the Jersey Blend fabrics are just as comfortable and light weight and easy to wash (no wrinkles) as his favorite H&M t-shirts.

Gorgeous Fabrics

This is an excellent shop to peruse if you are hoping to create a high end t-shirt in an unusual material.  There are some beautiful heathered jerseys and even some merino wool knits.  Some of the knits are labelled “Tee-shirt weight” which is useful for our purposes!  By the way – knits are 20% off right now!  And there are some REALLY beautiful Italian sweater knits in stock; I am super tempted to make another Newcastle Cardigan!


Aside from being able to design your own printed fabric at Spoonflower, you can also peruse the huge library of other people’s designs.  Spoonflower can print on an Organic Cotton Interlock knit which would likely be very suitable for a t-shirt and also on a jersey.  I haven’t ordered the swatch pack myself so don’t rely on my suggestions about which fabric type to print on!  It is probably best to order a sample pack for yourself :).


I hope you are able to find the perfect knits for your sew-along Strath Tee!  Make sure to use #strathtee when sharing your t-shirt progress.


Strathcona T-shirt Sew-Along

Strathcona Tshirt Sew Along Thread Theory

While we have quite a few sew-alongs and tutorials on our website, there are a few big gaping holes which really need to be filled!  One such hole is a sew-along for the t-shirt version of our Strathcona Henley and T-shirt pattern.  Currently, the only tutorial on our site specifically suited to the Strath is my tutorial on sewing the Henley button placket – extremely useful if you plan on sewing the Henley variation but not so helpful if you are sewing the T-shirt!

In preparation for the sew-along, the Strathcona T-shirt and Henley pattern is currently 25% off!  The tissue pattern is currently only $15.00 while the PDF pattern is only $8.25.  The sale will run until the sew along is over on September 23rd.


Here are the aspects I will cover in this sew along – you will notice it will only take three blog posts to complete (it really is that simple to sew a t-shirt):

Blog Post #1 on Sept 16th

  1. Choosing manly t-shirt knits

Blog Post #2 on September 18th

  1. Choosing a stitch style
  2. Cutting out your fabric

Blog Post #3 on September 21st

  1. Sewing the shoulders
  2. Sewing the neckline
  3. Sewing the sleeves and side seams
  4. Sewing the hems



I hope you will sew along with me!  Please don’t feel rushed to find fabric in time – you are welcome to start sewing whenever you are ready.  Any comments and questions added to these sew along posts will be answered by me indefinitely!  Please use #strathtee to share your sewing process and finished tees!


1 Comment

In the Wild: Switching Seasons

In the wild banner - small

With the seasons changing both in the Northern and Southern Hemisphere, I think it’s the perfect time to show off some of the inspiring projects you have made with our two current top-selling patterns!  Since we launched our big inventory clear out sale earlier this week, the Strathcona Henley and the Goldstream Peacoat have been flying off the shelves faster than any other pattern.

The Strathcona Henley is a great option for Spring in the Northern hemisphere because it can be sewn into a breathable cotton tee to layer under sweaters or it can be made into a light Henley sweater to wear over its t-shirt variation.  Perfect for days that fluctuate between chilly rain showers and glorious sunshine!

1 & 2 The Monthly Stitch – Helen Cloke  | 3 Lily Sage & Co | 4 Wardrobe Ecology | 5 Le Papillon | 6 Wardrobe Histology

Right this moment is a great time for those of you in the Southern hemisphere to start on your winter Goldstream Peacoat.  There is still lots of time to perfect each tailoring step before you will need the cozy coat for the winter.  Sewing the Goldstream is a great way to challenge yourself a little if you have got stuck in a rut of sewing quick and easy projects.  Sometimes it is nice to slow down the pace and really enjoy the process of sewing!

1, 2 & 3 English Girl at Home | 4, 5 & 6 JoChapeau

Thank you for sharing your sewing projects with us!  And thank you for the overwhelming response to our inventory clear out sale – our shelves are starting to look much more manageable.  Many Parkland Wardrobe Builders, individual sewing patterns and all sorts of tools are currently winging their way around the world to your sewing tables!


A Warm Waffle-Knit Strathcona


Last June, near my birthday, Erin (the super friendly sewist who blogs at Miss Crayola Creepy) surprised me by sending me a gift in the mail.  Not long prior she had made her husband a Strathcona Henley using a waffle knit that I coveted after searching fruitlessly for a similar fabric locally.  I had commented on her blog and had admired her henley (and her husband :P) and so Erin bought me some of the fabric and sent it along with a really nice birthday card.  Erin is a member of the LA Sewists group which is a network of sewing bloggers in the Los Angeles area.  They had a huge meet-up in June and we had contributed a pattern to their prize draw so Erin sent along some gorgeous LA Sewist wooden buttons as well for me to use for my Strathcona Henley.

***I can’t find an LA Sewist website to link to…does anyone know if one exists?***

Anyways, long story short, thank you very much for being such a thoughtful sewist Erin!  I was so thrilled to receive a gift in the mail from a fellow blogger and, now that winter is here and it is time for cozy sweaters, Matt is just as thrilled to have a waffle knit Strath at last!

As you can see, in the end I elected to skip the placket on this Strathcona and so the LA Sewists button remain nestled in my button container to await a future project.  I decided to do this because waffle knits do not retain their shape especially well and I worried that the weight of a button placket would cause the neckline and even the entire shirt front to droop considerably.  I’m glad I made this decision because as I sewed this shirt it felt like each seam was growing in length as I sewed it!  I used my serger and refrained from stretching the fabric as much as possible.  To combat the droopy nature of this knit I made both the neckline binding and the sleeve cuffs two inches narrower.  I probably could have taken as much as two more inches off!  As you can see above, the sleeve cuffs are still pretty wide (since Matt pulls up his sleeves to his elbows pretty often and has stretched them out a bit).StrathCamasCascade-25

Matt loves the fit of this Strath – it works nicely over t-shirts as a light sweater.  He layered it under another sweater when we went snow shoeing on the weekend and it provided lots of warmth.

I had mentioned a few posts ago that I would be working on a wardrobe update for Matt over the next few months and would post a plan for this soon…well, as you can see, the first garment is finished and I still haven’t posted the plan!  Here it is for you now:


My plan is to sew the waffle knit Strath (check!), three pairs of Comox Trunks using the fabric from our Comox Trunks kits (which happen to be on sale at the moment!) and then move on to some graphic Strathcona T-shirts.  Matt gets a lot of compliments on the printed t-shirt that I made using a Girl Charlee knit and so I plan to pick three or four new prints to create some more.  Matt doesn’t like to think much about outfit planning so I’ll try to pick prints that co-ordinate with most of his pants and sweaters.  I think they’ll be a nice way to elevate a regular daily outfit into something a bit more stylish!  Here are a few of the prints I’m currently admiring:

1) Sparrows in the Woods Cotton Jersey Blend Knit Fabric

2) Vintage Palm Screen Cotton Jersey Knit Fabric

3) Mod Circles on Blue Cotton Jersey Knit Fabric

Lastly, I’m going to use the Jutland Pants pattern to create some really rugged jeans for Matt.  He wears through jeans at a shocking rate and so I’m considering purchasing a good quality U.S. made denim from TaylorTailor in hopes that it will hold up better than the cheap denim used in Matt’s department store jeans.red_line_selvedge1-500x500

Whew, good thing my sewing mojo is at it’s peak at the moment!  I’ve been pumping out garments left, right and center and have a lot to show you over the next few weeks.  I hope you’re feeling on the top of your sewing game as well!

Leave a comment

In the Wild, November 4- Wild Jutlands Sighted!

In the wild banner - small

(Nicole’s Post)

Are you all as excited about the Jutland Pants as I am? My husband has been big into building this summer, so I definitely have these pants high on my (always growing) sewing list now. There’s nothing quite like a sturdy pair of pants. We’ve had a few images coming in from the test sewers, so I thought I would share the Jutlands in Action!

First though, did you know that the names Morgan comes up with are mountains on Vancouver Island? Makes a gal feel proud to be here, and also points out that I do not know any mountain ranges here. Good old Wikipedia shared with me this lovely photo of Jutland Mountain:

jutland mountain

I don’t know about you, but I would want some pretty rugged pants to clamber around that terrain. Preferably with flat-felled seams 🙂 Admittedly, no rugged pant is actually going to make me climb mountains, but sometimes it helps the ego to look the part of the alpine explorer.

First up for today, is test sewer Sophie-Lee. She wrote up a wonderful posts with lost of pictures, so head over there to check out her experience with the Jutland. Here, though, is my favourite- Jutlands at Work:

jut at work

Tool belt not included, but complements the pants very well. Take a look throughout the rest of Sophie-Lee’s blog too, it’s great!

Next up is from MaLora who is probably experiencing similarly wet weather to us on Vancouver Island since she is in soggy Seattle WA.


You should definitely check out her post about the Jutlands because there are adorable pictures of her kid let wearing a matching pair of pants. When I showed my husband that, he seemed pretty enthusiastic about Lena and he having matching pants (which would be extra cute with the matching Newcastles they already have). Make sure you notice the Strathcona Henley- and the matching one for wee mister!! EEEEE!

Of course, with a new pattern out in the shop, it’s a good time to revisit patterns you’ve loved making, and the ones that have been sitting around waiting for your courage (Looking at you Goldstream) or just the right knit (Strathcona…..)

Here’s a little inspiration for you to finish up those unfinished Thread Theory projects before you get to the Jutlands:


If you can read french, you will read that Clotilde is quite pleased with the pattern- “Vive Thread Theory!” I admit, it was slow going for me to read that one simple post. my french is a bit rusty having left Montreal nearly a year and a half ago (where did the time go?). Lena and I decided to spend our mornings in french, but since I tend toward foggy and cranky in the mornings (hey! I sew late! not my fault! ok, it is…), we will have to see how long that lasts…

Wally and Grace sent along this picture of a new Finlayson- looks cozy!


In other news, this weekend there is a little Makers Festival happening in the Comox Valley called “CREATE!” and Morgan is teaching a Comox Trunks class (which I am taking, and refer to as the ‘underwear party”) and she will also be showing how to make the waxed bag. There will be a table there with Thread Theory goodies! I want to spend the whole day there with them, but will be teaching all day saturday, so I only get to go to the underwear party. Happy face/sad face.

Have you started your Jutlands yet? What adventures would you want to take them on?